Changing and Testing a Nokē ONE Battery

Shows how to replace a dead battery and test it for the Nokē ONE lock.

Changing a Battery

You can quickly change the Nokē ONE battery using the removal tool. You should only use the battery supplied with Nokē ONE. Do not attempt to use other batteries as they will not have the necessary voltage, current, and capacity required for optimal performance.

To change the battery,

1. Slide the removal tool onto the Nokē ONE hasp lock so that the edge of the tool and the left edge of Nokē ONE connect.
2. While tightly holding removal tool in place, use opposite hand to firmly push in battery holder to release it.
3. Insert the battery into the battery holder. Make sure that the positive end of the battery is facing to the right.
4. With the battery in its holder, reinsert the holder back into the Nokē ONE hasp lock. Press firmly on the top and bottom to ensure that both hooks engage.

Testing the Lock

Before adding the Nokē ONE hasp lock to the Nokē Smart Entry system and receiving its
digital key, you’ll want to test it by manually unlocking it.

To test the lock,

1. Touch the plastic window on the front of the device three times. The light will turn blue when your touch is accepted.
2. After touching three times, the light turns green to indicate that the Nokē ONE device is now ready for unlocking.
3. Slide the hasp lo k left to the open position and right to lock it. The light turns red to confirm device is locked.

For more information, click below:

Troubleshooting Nokē ONE Battery Issues

Nokē ONE Generic Access Sheet
Installing Nokē ONE Locks on Occupied Units