Hardware
      Back to home
      1. Help Center
      2. NSE Hardware
      3. Hardware

      Replacing the Battery in a Fob

      A Step-by-Step Guide for Replacing the Nokē Fob Battery

      Replacing the Battery in a Fob

      The Nokē fob is powered by a CR2032 battery that typically lasts for several years. When it's time to replace the battery, follow this simple guide to ensure the fob continues functioning effectively.

      Tools You’ll Need

      1. A small, flat-edged tool for opening the fob's back panel:
        • Examples: coin, flat-head screwdriver, key, or similar.
      2. A tool to help remove the battery:
        • Examples: small screwdriver, bobby pin, or similar.

      Steps to Replace the Battery

      1. Open the Fob's Back Panel:

        • Locate the slot on the back of the fob.
        • Insert the flat-edged tool into the slot.
        • Rotate the tool gently in a counter-clockwise direction to detach the back panel.

      2. Remove the Old Battery:

        • Use the pointed tool to slide underneath the battery.
        • Carefully lift and remove the old battery.

      3. Insert the New Battery:

        • Take a new CR2032 battery and place it into the slot with the correct orientation (check the polarity).

      4. Replace the Back Panel:

        • Align the back panel with the fob.
        • Gently rotate it clockwise to secure it in place.

      Conclusion
      Replacing the battery in your Nokē fob is a simple process that ensures uninterrupted operation for years to come. If you encounter any issues, contact Nokē Support for assistance.

      Additional Resource
      For a visual demonstration, watch this quick video showing the battery replacement steps: